drawing number rev 1501 route 34 south farmingdale, nj 07727 title material fscm finish: all dim's in: inches (mm) 83330 this drawing and the contents herein are confidential and the sole property of dialight. reproduction of this drawing or construction of any parts within this drawing are forbidden without the written consent of dialight. dim "d" # .002 typ (2 plcs) dim "c" .175 # .020 4,44 # 0,5 [ ] 90 $ .250 [ 6,35 ] .020 [ 0,51 ] .175 [4,44] max .020 [ 0,5 ] .200 [ 5,08 ] .280 [ 7,11 ] .100 # .002 2,54 # 0,05 [ ] dim "b" # .004 typ dim "a" # .015 .100 # .015 2,54 # 0,38 [ ] .145 [ 3,68 ] b 3mm cbi, .200 high centerline reverse polarity; rohs compliant c-17686 dialight part number led color dim "a" dim "b" dim "c" dim "d" operating characteristics at 25 $ c ambient forward voltage test cond forward voltage (v) 551-0207-010f green diffused .105 .020 sq. .122 # .008 .043 5.6 16.0 i f = 10ma 3.0 563 551-0307-010f yellow diffused .105 .020 sq. .122 # .008 .043 i f = 10ma 2.2 6.3 i f = 10ma 2.1 3.0 10 585 45 551-0407-010f red diffused .105 .020 sq. .122 # .008 .043 i f = 10ma 3.6 10 i f = 10ma 3.0 10 650 45 551-1107-010F red diffused .095 .018 x .016 .118 # .010 .040 i f = 2ma 1.0 1.6 i f = 2ma 1.7 2.2 635 60 551-1207-010f yellow diffused .095 .018 x .016 .118 # .010 .040 i f = 2ma 1.0 1.6 i f = 2ma 1.8 2.7 50 585 60 551-1307-010f green diffused .095 .018 x .016 .118 # .010 .040 i f = 2ma 1.0 1.6 i f = 2ma 1.9 2.2 50 565 60 551-2507-010f orange diffused .095 .018 sq. .115 # .010 .040 i f = 10ma 3.4 7.0 10.8 i f = 10ma 1.9 2.4 100 600 60 551-3007-010f red/green bi-color white diffused lens .095 .020 sq. .118 # .010 .043 i f = 10ma i f = 20ma 100 60 551-3107-010f yellow/green bi-color white diffused lens .095 .018 x .016 .118 # .010 .040 i f = 10ma i f = 20ma 100 80 absolute maximum ratings at 25 $ c ambient power dissipation (mw) cont. fwd current (ma) peak fwd current (ma) reverse voltage (v) soldering temperature for 5 sec. operating temperature storage temperature 551-0207-010f 75 25 60 3 260 $ c -25 $ c /+85 $ c -30 $ c /+100 $ c 551-0307-010f 60 20 60 0.5 from 50 $ c 3 260 $ c -25 $ c /+85 $ c -30 $ c /+100 $ c 551-0407-010f 60 20 60 0.5 from 50 $ c 3 260 $ c -25 $ c /+85 $ c -30 $ c /+100 $ c 551-1107-010F 20 7 5 260 $ c -55 $ c /+100 $ c -55 $ c /+100 $ c 551-1207-010f 20 7 0.7 from 90 $ c 5 260 $ c -55 $ c /+100 $ c -55 $ c /+100 $ c 551-1307-010f 20 7 0.7 from 90 $ c 5 260 $ c -55 $ c /+100 $ c -55 $ c /+100 $ c 551-2507-010f 135 25 90 0.5 from 50 $ c 5 260 $ c -55 $ c /+100 $ c -55 $ c /+100 $ c 551-3007-010f 100 30 120 0.4 from 50 $ c 5 260 $ c -55 $ c /+100 $ c -55 $ c /+100 $ c 551-3107-010f 60 20 80 0.25 from 50 $ c 5 260 $ c -55 $ c /+100 $ c -55 $ c /+100 $ c scale: 5.000 tolerances: unless otherwise specified fractions: # 1/64 decimals (.xx): # .02 decimals (.xxx): # .010 angles: # 3 $ sheet 1 of 1 family table: rev ecn no revisions drn ckd app date a new release klj no mes 12-11-08 b added p/n 551-0807-010f ajf klj no 2-14-11 luminous intensity test condition luminous intensity (mcd) reverse current ( a) peak wavelength (nm) viewing angle (deg) min typ max typ max max typ typ i f = 10ma 2.1 10 45 2.0 551-0807-010f blue, white diff. lens .101 .020 sq. .110 # .004 .043 i f = 10ma 14.0 22.4 35.5 i f = 10ma 3.5 4.1 10 428 70 50 2.5 3.7 4.7 10 2.0 2.1 2.8 2.8 635 565 2.5 2.5 4.3 6.3 2.1 2.1 2.8 2.8 585 565 part number linear deration (ma/ $ c) 0.5 from 50 $ c 551-0807-010f 90 20 .44 from 50 $ c 5 260 $ c -55 $ c /+100 $ c -55 $ c /+100 $ c 0.7 from 90 $ c red green 100 30 120 0.4 from 50 $ c yellow green 100 30 120 0.4 from 50 $ c recommended p.c.b. hole pattern 3mm led 2 1 anode for single colors green cathode for bi-colors notes: 1. led lead dimensions shown are measured at housing exit. 2. leads to fit into holes spaced as per pattern. 3. pin numbers for reference only, designation non-existent on part. 4. dialight part numbers: 551-xx07-010f. 5. this assembly contains electrostatic discharge sensitive devices (esds). maintain all precautionary measures during assembly, handling, and storage in accordance with ipc-a-610. rohs compliant 551-xx07-010f part numbers with the "f" suffix ending are rohs compliant. for example: 551-0207-010f packaging is marked with "rohs compliant" label or equivalent markings. parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260c temp. for 5 sec. bi-color led schematic pin 2 red cathode for r/g yel cathode for y/g pin 1 grn cathode for r/g grn cathode for y/g single color led schematic pin 2 cathode pin 1 attention: observe precautions for handling electrostatic sensitive devices
|
